Araştırma Makalesi
BibTex RIS Kaynak Göster

A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy

Yıl 2019, Cilt: 34 Sayı: 2, 1 - 8, 30.06.2019
https://doi.org/10.21605/cukurovaummfd.608917

Öz

In this study, the effect of nozzle traverse speed on the geometric tolerances in the drilling of AA 7075 aluminum alloy by abrasive water jet was investigated. Holes were drilled with a diameter of 10 mm using 10 different nozzle traverse speeds (10, 16, 24, 34, 45, 55, 65, 75, 90 and 110 mm/min) and the other parameters were kept constant. Circularity and cylindricity deviation of the holes drilled using different nozzle traverse speeds was measured using a CMM. It was found that the increase in nozzle traverse speed results in increased deviation values from circularity and cylindricity. As a result, increased nozzle traverse speed reduces the amount of abrasive contacting the unit surface and the cutting process does not occur in accordance with the desired geometry. 

Kaynakça

  • 1. Jain, V.K., 2009. Advanced Machining Processes, Allied Publishers.
  • 2. Cogun, C., 1993. Computer-aided System for Selection of Nontraditional Machining Operations, in Industry, 169-179.
  • 3. Paul, S., Hoogstrate, A. M., Luttervelt Van, C. A., Kals, H.J.J., 1998. An Experimental Investigation of Rectangular Pocket Milling With Abrasive Water Jet, Journal of Materials Processing Technology, 73 (1-3): 179-188.
  • 4. Nanduri, M., Taggart, D.G., Kim, T.J., 2002. The Effects of System and Geometric Parameters on Abrasive Water Jet Nozzle Wear, International Journal of Machine Tools and Manufacture, 615-623.
  • 5. Momber, A.W., Kovacevic, R., 2012. Principles of Abrasive Water Jet Machining, Springer Science& Business Media.
  • 6. Kovacevic, R., 1991. Surface Texture in Abrasive Waterjet Cutting, Journal of Manufacturing Systems, 32-40.
  • 7. Ohman, J.L., 1993. Abrasives: Their Characteristics and Effect on Waterjet Cutting, Proceedings of the 7th American Waterjet Conference, 351-362, USA.
  • 8. Azmir, M.A., Ahsan, A.K., 2009. A Study of Abrasive Water Jet Machining Process on Glass/epoxy Composite Laminate, Journal of Materials Processing Technology, 209; 6168-6173.
  • 9. Akkurt, M., 2009. AlSl 1030 Çeliginin Asındırıcılı Su Jeti ile Kesilmesinde Yüzey Pürüzlülüğünün ve Kesme Önü Geometrisinin İncelenmesi, Cilt:15, 1-11. 10. Limbachiya, V.J., Patel, D.M., 2011. Parametric Analysis of Abrasive Water Jet Machine of Aluminium Material, 1(2), 282-286.
  • 11. Reddy, D.S., Kumar, A.S., Rao, M.S., 2014. Parametric Optimization of Abrasive Water Jet Machining of Inconel 800H Using Taguchi Methodology, Universal Journal of Mechanical Engineering, 158-162.
  • 12. Öjmertz, C., 1997. A Study on Abrasive Waterjet Milling, Department of Production Engineering. Thessis for Degree of Doctor of Philosophy, Sweden.
  • 13. Huaizhong Li, Jun Wang, Ngaiming Kwok, Thai Nguyen and Guan Heng Yeoh, 2018. A Study of the Micro-hole Geometry Evolution on Glass by Abrasive Air-jet Micromachining, Journal of Manufacturing Processes 31, 156-161.
  • 14. Srikanth, D.V., Sreenivasa Rao, M., 2014. Metal Removal and Kerf Analysis in Abrasive Jet Drilling of Glass Sheets, 3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Procedia Materials Science 6, 1303-1311.
  • 15. Akkurt, A., 2009. The Effect of Material Type and Plate Thickness on Drilling Time of Abrasive Water Jet Drilling Process, Materials and Design 30, 810-815.
  • 16. Hlaváˇc, L.M., 2009. Investigation of the Abrasive Water Jet Trajectory Curvature Inside the Kerf, Journal of Materials Processing Technology 209, 4154-4161.
  • 17. Shin B., Park, K., Bahk,Yeon-K., Park S., Lee, J., Go, J., Kang, M., Lee, C., 2009. Rapid Manufacturing of SiC Molds with Micro-sized Holes using Abrasive Water Jet, Transactions of Nonferrous Metals Society of China, 19(78), 182.
  • 18. Shukla, R., Singh, D., 2017. Experimentation Investigation of Abrasive Waterjet Machining Parameters using Taguchi and Evolutionary Optimization Techniques, Swarmand Evolutionary Computation 32, 167-183.
  • 19. Gupta, V., P.M. Pandey, Garg, M., Khanna, R, Batra., N.K., 2014. Minimization of Kerf Taper Angle and Kerf Width using Taguchi’s Method in Abrasive Water Jet Machining of Marble, Procedia Materials Science 6, 140-149.
  • 20. Abhishek, K., Hiremath, S., 2016. Machining of Micro-holes on Sodalime Glass using Developed Micro-Abrasive Jet Machine (μ-AJM), Procedia Technology, 25, 1234-1241.
  • 21. Prasad, K., Basha, D., Varaprasad, K.C., 2017. Experimental Investigation and Analysis of Process Parameters in Abrasive Jet Machining of Ti-6Al-4V alloy using Taguchi Method, Materials Today: Proceedings 4, 10894-10903.
  • 22. Changshui, L., Zhuang, Z., Kai, G., Chao, 2018. Abrasive Water Jet Drilling of Ceramic Thermal Barrier Coatings, 19th CIRP Conferencebon Electro Physical and Chemical Machinig, 23-27 April, Bilbao, Spain, 517-522.
  • 23. Changshui, G., Zhuang, L., Kai, Z., Chao, G., 2018. Abrasive Water Jet Drilling of Ceramic Thermal Barrier Coatings, 19th CIRP Conferencebon Electro Physical and Chemical Machinig, 23-27 April, Bilbao, Spain, 517-522.
  • 24. Saraçyakupoğlu, T., 2012. Analysis of Material, Pressure, Cutting Velocity and Water Jet Diameter’s Effect on the Surface Quality for the Water Jet Cutting, Institute of Science and Technology, Doctorate Thesis, Eskisehir Osmangazi University, 29-78.

AA 7705 Alüminyum Alaşımının Aşındırıcı Su Jeti ile Delinmesinde Traverse Hızının Geometrik Toleranslara Etkisinin Araştırılması

Yıl 2019, Cilt: 34 Sayı: 2, 1 - 8, 30.06.2019
https://doi.org/10.21605/cukurovaummfd.608917

Öz

Bu çalışmada, aşındırıcı su jeti ile AA7075 alüminyun alaşımının delinmesinde nozul travers hızının geometrik toleranslara etkisi araştırılmıştır. Delikler 10 farklı nozul travers hızı (10, 16, 24, 34, 45, 55, 65, 75, 90 ve 110 mm/dak) kullanılarak 10 mm çapında delinmiş ve diğer parametreler sabit tutulmuştur. Farklı nozul travers hızları kullanılarak açılan deliklerin dairesel ve silindiriklik sapması CMM kullanılarak ölçülmüştür. Nozul traverse hızı artışının silindiriklik ve dairesellikten sapma değerlerinin artışına neden olduğu tespit edilmiştir. Sonuç olarak, artan nozul traverse hızı birim yüzeye temas eden aşındırıcı miktarını azaltmakta ve istenilen geometri doğrultusunda kesme işlemi gerçekleşmemektedir. 

Kaynakça

  • 1. Jain, V.K., 2009. Advanced Machining Processes, Allied Publishers.
  • 2. Cogun, C., 1993. Computer-aided System for Selection of Nontraditional Machining Operations, in Industry, 169-179.
  • 3. Paul, S., Hoogstrate, A. M., Luttervelt Van, C. A., Kals, H.J.J., 1998. An Experimental Investigation of Rectangular Pocket Milling With Abrasive Water Jet, Journal of Materials Processing Technology, 73 (1-3): 179-188.
  • 4. Nanduri, M., Taggart, D.G., Kim, T.J., 2002. The Effects of System and Geometric Parameters on Abrasive Water Jet Nozzle Wear, International Journal of Machine Tools and Manufacture, 615-623.
  • 5. Momber, A.W., Kovacevic, R., 2012. Principles of Abrasive Water Jet Machining, Springer Science& Business Media.
  • 6. Kovacevic, R., 1991. Surface Texture in Abrasive Waterjet Cutting, Journal of Manufacturing Systems, 32-40.
  • 7. Ohman, J.L., 1993. Abrasives: Their Characteristics and Effect on Waterjet Cutting, Proceedings of the 7th American Waterjet Conference, 351-362, USA.
  • 8. Azmir, M.A., Ahsan, A.K., 2009. A Study of Abrasive Water Jet Machining Process on Glass/epoxy Composite Laminate, Journal of Materials Processing Technology, 209; 6168-6173.
  • 9. Akkurt, M., 2009. AlSl 1030 Çeliginin Asındırıcılı Su Jeti ile Kesilmesinde Yüzey Pürüzlülüğünün ve Kesme Önü Geometrisinin İncelenmesi, Cilt:15, 1-11. 10. Limbachiya, V.J., Patel, D.M., 2011. Parametric Analysis of Abrasive Water Jet Machine of Aluminium Material, 1(2), 282-286.
  • 11. Reddy, D.S., Kumar, A.S., Rao, M.S., 2014. Parametric Optimization of Abrasive Water Jet Machining of Inconel 800H Using Taguchi Methodology, Universal Journal of Mechanical Engineering, 158-162.
  • 12. Öjmertz, C., 1997. A Study on Abrasive Waterjet Milling, Department of Production Engineering. Thessis for Degree of Doctor of Philosophy, Sweden.
  • 13. Huaizhong Li, Jun Wang, Ngaiming Kwok, Thai Nguyen and Guan Heng Yeoh, 2018. A Study of the Micro-hole Geometry Evolution on Glass by Abrasive Air-jet Micromachining, Journal of Manufacturing Processes 31, 156-161.
  • 14. Srikanth, D.V., Sreenivasa Rao, M., 2014. Metal Removal and Kerf Analysis in Abrasive Jet Drilling of Glass Sheets, 3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Procedia Materials Science 6, 1303-1311.
  • 15. Akkurt, A., 2009. The Effect of Material Type and Plate Thickness on Drilling Time of Abrasive Water Jet Drilling Process, Materials and Design 30, 810-815.
  • 16. Hlaváˇc, L.M., 2009. Investigation of the Abrasive Water Jet Trajectory Curvature Inside the Kerf, Journal of Materials Processing Technology 209, 4154-4161.
  • 17. Shin B., Park, K., Bahk,Yeon-K., Park S., Lee, J., Go, J., Kang, M., Lee, C., 2009. Rapid Manufacturing of SiC Molds with Micro-sized Holes using Abrasive Water Jet, Transactions of Nonferrous Metals Society of China, 19(78), 182.
  • 18. Shukla, R., Singh, D., 2017. Experimentation Investigation of Abrasive Waterjet Machining Parameters using Taguchi and Evolutionary Optimization Techniques, Swarmand Evolutionary Computation 32, 167-183.
  • 19. Gupta, V., P.M. Pandey, Garg, M., Khanna, R, Batra., N.K., 2014. Minimization of Kerf Taper Angle and Kerf Width using Taguchi’s Method in Abrasive Water Jet Machining of Marble, Procedia Materials Science 6, 140-149.
  • 20. Abhishek, K., Hiremath, S., 2016. Machining of Micro-holes on Sodalime Glass using Developed Micro-Abrasive Jet Machine (μ-AJM), Procedia Technology, 25, 1234-1241.
  • 21. Prasad, K., Basha, D., Varaprasad, K.C., 2017. Experimental Investigation and Analysis of Process Parameters in Abrasive Jet Machining of Ti-6Al-4V alloy using Taguchi Method, Materials Today: Proceedings 4, 10894-10903.
  • 22. Changshui, L., Zhuang, Z., Kai, G., Chao, 2018. Abrasive Water Jet Drilling of Ceramic Thermal Barrier Coatings, 19th CIRP Conferencebon Electro Physical and Chemical Machinig, 23-27 April, Bilbao, Spain, 517-522.
  • 23. Changshui, G., Zhuang, L., Kai, Z., Chao, G., 2018. Abrasive Water Jet Drilling of Ceramic Thermal Barrier Coatings, 19th CIRP Conferencebon Electro Physical and Chemical Machinig, 23-27 April, Bilbao, Spain, 517-522.
  • 24. Saraçyakupoğlu, T., 2012. Analysis of Material, Pressure, Cutting Velocity and Water Jet Diameter’s Effect on the Surface Quality for the Water Jet Cutting, Institute of Science and Technology, Doctorate Thesis, Eskisehir Osmangazi University, 29-78.
Toplam 23 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Makaleler
Yazarlar

İsmail Tekaüt

Yayımlanma Tarihi 30 Haziran 2019
Yayımlandığı Sayı Yıl 2019 Cilt: 34 Sayı: 2

Kaynak Göster

APA Tekaüt, İ. (2019). A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 34(2), 1-8. https://doi.org/10.21605/cukurovaummfd.608917
AMA Tekaüt İ. A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy. cukurovaummfd. Haziran 2019;34(2):1-8. doi:10.21605/cukurovaummfd.608917
Chicago Tekaüt, İsmail. “A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy”. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 34, sy. 2 (Haziran 2019): 1-8. https://doi.org/10.21605/cukurovaummfd.608917.
EndNote Tekaüt İ (01 Haziran 2019) A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 34 2 1–8.
IEEE İ. Tekaüt, “A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy”, cukurovaummfd, c. 34, sy. 2, ss. 1–8, 2019, doi: 10.21605/cukurovaummfd.608917.
ISNAD Tekaüt, İsmail. “A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy”. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 34/2 (Haziran 2019), 1-8. https://doi.org/10.21605/cukurovaummfd.608917.
JAMA Tekaüt İ. A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy. cukurovaummfd. 2019;34:1–8.
MLA Tekaüt, İsmail. “A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy”. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, c. 34, sy. 2, 2019, ss. 1-8, doi:10.21605/cukurovaummfd.608917.
Vancouver Tekaüt İ. A Study on the Effect of Traverse Speed on Geometric Tolerances in Abrasive Waterjet Drilling of Aa7075 Aluminium Alloy. cukurovaummfd. 2019;34(2):1-8.