In this study, an experimental study was performed for the ultrasonicassisted turning of Ti6Al4V. The surface properties of titanium alloy machined by ultrasonic-assisted turning method were examined. Also, chip morphology was investigated. These measurements were compared with conventional turning operations performed with same cutting parameters. It was seen that ultrasonic-assisted turning affects surface properties. Average surface roughness was reduced, and less deformation was observed on the workpiece surface. Also, serrated and irregular chips were observed.
Ultrasonic-assisted turning Ti6Al4V Surface roughness Chip morphology
In this study, an experimental study was performed for the ultrasonic-assisted turning of Ti-6Al-4V. The surface properties of titanium alloy machined by ultrasonic-assisted turning method were examined. Also, chip morphology was investigated. These measurements were compared with conventional turning operations performed with same cutting parameters. It was seen that ultrasonic-assisted turning affects surface properties. Average surface roughness was reduced, and less deformation was observed on the workpiece surface. Also, serrated and irregular chips were observed.
Ultrasonic-assisted turning Ti-6Al-4V Surface roughness Chip morphology
Birincil Dil | İngilizce |
---|---|
Konular | Makine Mühendisliği |
Bölüm | Araştırma, Geliştirme ve Uygulama Makaleleri |
Yazarlar | |
Yayımlanma Tarihi | 16 Mayıs 2019 |
Gönderilme Tarihi | 30 Ağustos 2018 |
Yayımlandığı Sayı | Yıl 2018 Cilt: 16 Sayı: 1 |